In this paper two options for H-2 production, by means of natural gas, are presented and their performances are evaluated when they are integrated with advanced H-2/air cycles. In this investigation two different schemes have been analyzed: an advanced combined cycle power plant (CC) and a new advanced mixed cycle power plant (AMC). The two methods for producing H-2 are as follows: (1) steam methane reforming: it is the simplest and potentially the most economic method for producing hydrogen in the foreseeable future; and (2) partial oxidation of methane: it could offer an energy advantage because this method reduces the energy requirement of the reforming process. These hydrogen production plants require material and energetic integrations with power section and the best interconnections must be investigated in order to obtain good overall performance. With reference to thermodynamic and economic performance, significant. comparisons have been made between the above introduced reference plants. An efficiency decrease and an increase in the cost of electricity has been obtained when power plants are equipped with a natural gas decarbonization section. The main results of the performed investigation are quite variable among the different H2 production technologies here considered: the efficiency decreases in a range of 5.5 percentage points to nearly 10 for the partial oxidation of the natural gas and in a range of about 9 percentage points to over 12 for the steam methane reforming. The electricity production cost increases in a range of about 41-42% for the first option and in a range of about 34-38% for the second one. The AMC, coupled with partial oxidation, stands out among the other power plant solutions here analyzed because it exhibits the highest net efficiency and the lowest final specific CO2 emission. In addition to this, economic impact is favorable when AMC is equipped with systems for H-2 production based on partial oxidation of natural gas.

Gambini, M., Vellini, M. (2006). Natural gas decarbonization technologies for advanced power plants. In ASME power conference - 2006 paper PWR2006-88105 (pp.1114-1124). NEW YORK : ASME-AMER SOC MECHANICAL ENG [10.1115/1.2719266].

Natural gas decarbonization technologies for advanced power plants

GAMBINI, MARCO;VELLINI, MICHELA
2006-01-01

Abstract

In this paper two options for H-2 production, by means of natural gas, are presented and their performances are evaluated when they are integrated with advanced H-2/air cycles. In this investigation two different schemes have been analyzed: an advanced combined cycle power plant (CC) and a new advanced mixed cycle power plant (AMC). The two methods for producing H-2 are as follows: (1) steam methane reforming: it is the simplest and potentially the most economic method for producing hydrogen in the foreseeable future; and (2) partial oxidation of methane: it could offer an energy advantage because this method reduces the energy requirement of the reforming process. These hydrogen production plants require material and energetic integrations with power section and the best interconnections must be investigated in order to obtain good overall performance. With reference to thermodynamic and economic performance, significant. comparisons have been made between the above introduced reference plants. An efficiency decrease and an increase in the cost of electricity has been obtained when power plants are equipped with a natural gas decarbonization section. The main results of the performed investigation are quite variable among the different H2 production technologies here considered: the efficiency decreases in a range of 5.5 percentage points to nearly 10 for the partial oxidation of the natural gas and in a range of about 9 percentage points to over 12 for the steam methane reforming. The electricity production cost increases in a range of about 41-42% for the first option and in a range of about 34-38% for the second one. The AMC, coupled with partial oxidation, stands out among the other power plant solutions here analyzed because it exhibits the highest net efficiency and the lowest final specific CO2 emission. In addition to this, economic impact is favorable when AMC is equipped with systems for H-2 production based on partial oxidation of natural gas.
ASME Power Conference 2006
Atlanta, GA
MAY 02-04, 2006
Amer Soc Mech Engineers, Power Div
Rilevanza internazionale
2006
Settore ING-IND/09 - SISTEMI PER L'ENERGIA E L'AMBIENTE
English
Combined cycle power plants; Decarbonization; Electricity; Hydrogen; Methane; Thermodynamics; Advanced mixed cycle power plant; Natural gas decarbonization technologies; Steam methane reforming; Natural gas; Combined cycle power plants; Decarbonization; Electricity; Hydrogen; Methane; Natural gas; Thermodynamics
Intervento a convegno
Gambini, M., Vellini, M. (2006). Natural gas decarbonization technologies for advanced power plants. In ASME power conference - 2006 paper PWR2006-88105 (pp.1114-1124). NEW YORK : ASME-AMER SOC MECHANICAL ENG [10.1115/1.2719266].
Gambini, M; Vellini, M
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2108/35482
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 3
  • ???jsp.display-item.citation.isi??? 2
social impact