Foams of polycaprolactone (PCL) and microbial polyester (poly-hydroxybutyrate-hydroxyvalerate, PHBV with 10% mol PHV) were produced by particulate leaching in an urea preform and subsequent preform dissolution in distilled water. Films were also cast to compare mechanical and shape memory performances. SEM observations of foam sections showed that a homogenous microstructure was obtained with good replication of urea particles. Cylindrical PHBV samples (porosity about 90%) were used for shape memory tests in compression mode and a good behavior was observed. After training, 100% shape recovery can be achieved if a maximum 30% compression is applied.

Quadrini, F., Bellisario, D., Santo, L., Del Gaudio, C., Bianco, A. (2013). Shape memory foams of microbial polyester for biomedical applications. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 52(6), 599-602 [10.1080/03602559.2012.762526].

Shape memory foams of microbial polyester for biomedical applications

QUADRINI, FABRIZIO;BELLISARIO, DENISE;SANTO, LOREDANA;BIANCO, ALESSANDRA
2013-01-01

Abstract

Foams of polycaprolactone (PCL) and microbial polyester (poly-hydroxybutyrate-hydroxyvalerate, PHBV with 10% mol PHV) were produced by particulate leaching in an urea preform and subsequent preform dissolution in distilled water. Films were also cast to compare mechanical and shape memory performances. SEM observations of foam sections showed that a homogenous microstructure was obtained with good replication of urea particles. Cylindrical PHBV samples (porosity about 90%) were used for shape memory tests in compression mode and a good behavior was observed. After training, 100% shape recovery can be achieved if a maximum 30% compression is applied.
2013
Pubblicato
Rilevanza internazionale
Articolo
Esperti anonimi
Settore ING-IND/16 - TECNOLOGIE E SISTEMI DI LAVORAZIONE
English
Con Impact Factor ISI
Quadrini, F., Bellisario, D., Santo, L., Del Gaudio, C., Bianco, A. (2013). Shape memory foams of microbial polyester for biomedical applications. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 52(6), 599-602 [10.1080/03602559.2012.762526].
Quadrini, F; Bellisario, D; Santo, L; Del Gaudio, C; Bianco, A
Articolo su rivista
File in questo prodotto:
File Dimensione Formato  
Shape Memory Foams of Microbial Polyester for.pdf

solo utenti autorizzati

Licenza: Non specificato
Dimensione 1.14 MB
Formato Adobe PDF
1.14 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2108/76867
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 20
  • ???jsp.display-item.citation.isi??? 18
social impact