Poly(ε-caprolactone) (PCL) is a hydrophobic aliphatic polyester commonly used as a biomaterial due to its cytocompatibility and biodegradability. However, PCL-based materials are hydrophobic and susceptible to bacterial adhesion and proliferation. To address these disadvantages, this study proposes a direct and practical method for functionalizing the surface and enhancing the biological properties of electrospun PCL fibers using Tween-20 surfactant, followed by the deposition of polyelectrolyte multilayers (PEMs). Tween-20, a neutral and cytocompatible surfactant, was directly incorporated into the fibers without prior surface modifications. The surfactant significantly increased the wettability of the PCL fibers, resulting in water contact angles of 0 degrees, facilitating subsequent functionalization with heparin and chitosan PEMs (with 10, 20, and 30 layers). The materials were characterized through scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), water contact angle and mechanical measurements, Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The PEMs remain stable on the fiber surfaces for up to 14 days in a buffer at 37◦C. The samples supported high cell viability with no observed cytotoxicity toward human adipose-derived stem cells and no hemolytic activity toward human red blood cells. Antibacterial assays (live/dead and proliferation tests) demonstrated that the coated PCL fibers inhibited the proliferation of Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). The PEM coatings significantly enhanced the antimicrobial activity, resulting in a high number of damaged and dead bacterial cells attached to the coated fibers. Therefore, the heparin/chitosan PEMs on Tween- 20-modified PCL fibers can prevent bacterial infections while supporting viable mammalian cells.

Veregue, F.r., Madruga, L., Popat, K.c., Rosa, F.a., Radovanovic, E., Matricardi, P., et al. (2024). Enhancing biological properties with straightforward deposition of durable heparin/chitosan surface coatings on wettable poly(ε-caprolactone)/Tween-20 electrospun fibers. SURFACES AND INTERFACES, 46 [10.1016/j.surfin.2024.104149].

Enhancing biological properties with straightforward deposition of durable heparin/chitosan surface coatings on wettable poly(ε-caprolactone)/Tween-20 electrospun fibers

Matricardi, Pietro;
2024-01-01

Abstract

Poly(ε-caprolactone) (PCL) is a hydrophobic aliphatic polyester commonly used as a biomaterial due to its cytocompatibility and biodegradability. However, PCL-based materials are hydrophobic and susceptible to bacterial adhesion and proliferation. To address these disadvantages, this study proposes a direct and practical method for functionalizing the surface and enhancing the biological properties of electrospun PCL fibers using Tween-20 surfactant, followed by the deposition of polyelectrolyte multilayers (PEMs). Tween-20, a neutral and cytocompatible surfactant, was directly incorporated into the fibers without prior surface modifications. The surfactant significantly increased the wettability of the PCL fibers, resulting in water contact angles of 0 degrees, facilitating subsequent functionalization with heparin and chitosan PEMs (with 10, 20, and 30 layers). The materials were characterized through scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), water contact angle and mechanical measurements, Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The PEMs remain stable on the fiber surfaces for up to 14 days in a buffer at 37◦C. The samples supported high cell viability with no observed cytotoxicity toward human adipose-derived stem cells and no hemolytic activity toward human red blood cells. Antibacterial assays (live/dead and proliferation tests) demonstrated that the coated PCL fibers inhibited the proliferation of Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). The PEM coatings significantly enhanced the antimicrobial activity, resulting in a high number of damaged and dead bacterial cells attached to the coated fibers. Therefore, the heparin/chitosan PEMs on Tween- 20-modified PCL fibers can prevent bacterial infections while supporting viable mammalian cells.
2024
Pubblicato
Rilevanza internazionale
Articolo
Esperti anonimi
Settore CHEM-08/A - Tecnologia, socioeconomia e normativa dei medicinali e dei prodotti per il benessere e per la salute
English
Con Impact Factor ISI
Layer-by-layer Polysaccharides Biological properties Bactericidal activity
Veregue, F.r., Madruga, L., Popat, K.c., Rosa, F.a., Radovanovic, E., Matricardi, P., et al. (2024). Enhancing biological properties with straightforward deposition of durable heparin/chitosan surface coatings on wettable poly(ε-caprolactone)/Tween-20 electrospun fibers. SURFACES AND INTERFACES, 46 [10.1016/j.surfin.2024.104149].
Veregue, Fr; Madruga, Lyc; Popat, Kc; Rosa, Fa; Radovanovic, E; Matricardi, P; Kipper, Mj; Martins, Af
Articolo su rivista
File in questo prodotto:
File Dimensione Formato  
Untitled_martin.pdf

solo utenti autorizzati

Tipologia: Versione Editoriale (PDF)
Licenza: Copyright dell'editore
Dimensione 1.82 MB
Formato Adobe PDF
1.82 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2108/429723
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 12
  • ???jsp.display-item.citation.isi??? 12
social impact