Today, carbon fiber reinforced plastics (CFRPs) are materials of interest several industrial sectors because of their mechanical properties and low weight. However, applications in high-temperature areas are limited because of thermal degradation. Thus, thin coatings acting as thermal shielding and ensuring the upkeep of CFRP structural stiffness are of high interest. This work presents an innovative approach to produce copper/graphene bilayer coatings through electrodeposition and electrophoretic deposition; it consists of laser pre-treatment of the composite surface to remove the matrix layer exposing the carbon fibers, enabling the subsequent deposition. Bi-layer graphene/copper coatings exhibit an enhancement in copper electrodeposition efficiency of more than 59% resulting in a 97% stiffness improvement compared to the single layer copper electroplating. All the obtained coatings were able to act as a thermal shield of the CFRPs, reducing the maximum temperature of the composite by more than 60%. In particular, due to the synergistic effect of copper and graphene, the GNPs-Cu coating achieved the highest maximum temperature reduction (81%). Cross-sectional analysis indicates severe delamination in uncoated CFRPs, whereas double-layer coatings maintain structural integrity and prevent delamination even under high-energy exposure. In addition, the coated composites exhibit a higher electrical conductivity compared to the laser cleaned CFRP, with the GNPs-Cu coating that obtained a 90% enhancement because of the outstanding electrical properties of copper and graphene. Highlights: The laser cleaning pretreatment allows the electrodepositions on CFRPs. The GNP-Cu scenario achieves the highest deposition efficiency. A 97% stiffness improvement was achieved by GNPs-Cu scenario. GNPs-Cu coatings exhibit the utmost reduction in resistivity (98%). The GNPs-Cu coating achieves the highest thermal shielding performance (81%).

Genna, S., Salvi, D., Ucciardello, N. (2024). Copper‐graphene coatings for improving thermal shielding of CFRPs through electrodeposition techniques. POLYMER COMPOSITES [10.1002/pc.29083].

Copper‐graphene coatings for improving thermal shielding of CFRPs through electrodeposition techniques

Genna, Silvio;Salvi, Daniel;Ucciardello, Nadia
2024-01-01

Abstract

Today, carbon fiber reinforced plastics (CFRPs) are materials of interest several industrial sectors because of their mechanical properties and low weight. However, applications in high-temperature areas are limited because of thermal degradation. Thus, thin coatings acting as thermal shielding and ensuring the upkeep of CFRP structural stiffness are of high interest. This work presents an innovative approach to produce copper/graphene bilayer coatings through electrodeposition and electrophoretic deposition; it consists of laser pre-treatment of the composite surface to remove the matrix layer exposing the carbon fibers, enabling the subsequent deposition. Bi-layer graphene/copper coatings exhibit an enhancement in copper electrodeposition efficiency of more than 59% resulting in a 97% stiffness improvement compared to the single layer copper electroplating. All the obtained coatings were able to act as a thermal shield of the CFRPs, reducing the maximum temperature of the composite by more than 60%. In particular, due to the synergistic effect of copper and graphene, the GNPs-Cu coating achieved the highest maximum temperature reduction (81%). Cross-sectional analysis indicates severe delamination in uncoated CFRPs, whereas double-layer coatings maintain structural integrity and prevent delamination even under high-energy exposure. In addition, the coated composites exhibit a higher electrical conductivity compared to the laser cleaned CFRP, with the GNPs-Cu coating that obtained a 90% enhancement because of the outstanding electrical properties of copper and graphene. Highlights: The laser cleaning pretreatment allows the electrodepositions on CFRPs. The GNP-Cu scenario achieves the highest deposition efficiency. A 97% stiffness improvement was achieved by GNPs-Cu scenario. GNPs-Cu coatings exhibit the utmost reduction in resistivity (98%). The GNPs-Cu coating achieves the highest thermal shielding performance (81%).
2024
Pubblicato
Rilevanza internazionale
Articolo
Esperti anonimi
Settore ING-IND/16
Settore IIND-04/A - Tecnologie e sistemi di lavorazione
English
GNPs
Heat management
Laser cleaning
TBC
Genna, S., Salvi, D., Ucciardello, N. (2024). Copper‐graphene coatings for improving thermal shielding of CFRPs through electrodeposition techniques. POLYMER COMPOSITES [10.1002/pc.29083].
Genna, S; Salvi, D; Ucciardello, N
Articolo su rivista
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2108/393649
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact