Degradation of trichloroethylene vapors by micrometric zero-valent Fe-Cu and Fe-Ni bimetals under partially saturated conditions

The degradation of trichloroethylene (TCE) vapors by zero-valent Iron-Copper (Fe-Cu) and Iron-Nickel (Fe-Ni) bimetals with 1%, 5% and 20% weight content (%wt) of Cu or Ni was tested in anaerobic batch vapor systems carried out at ambient room temperature (20 & PLUSMN; 2 degrees C) under partially saturated conditions. The concentrations of TCE and byproducts were determined at discrete reaction time intervals (4 h-7 days) by analyzing the headspace vapors. In all the experiments, up to 99.9% degradation of TCE in the gas phase was achieved after 2-4 days with zero-order TCE degradation kinetic constants in the range of 134-332 g mair 3d - 1. Fe-Ni showed a higher reactivity towards TCE vapors compared to Fe-Cu, with up to 99.9% TCE dechlorination after 2 days of reaction, i.e., significantly higher than zero-valent iron alone that in previous studies was found to achieve comparable TCE degradation after minimum 2 weeks of reaction. The only detectable byproducts of the reactions were C3-C6 hydrocarbons. Neither vinyl chloride or dichloroethylene peaks were detected in the tested conditions above their method quantification limits that were in the order of 0.01 g mair 3. In view of using the tested bimetals in horizontal permeable reactive barriers (HPRBs) placed in the unsaturated zone to treat chlorinated solvent vapors emitted from contaminated groundwater, the experimental results obtained were integrated into a simple analytical model to simulate the reactive transport of vapors through the barrier. It was found that an HPRB of 20 cm could be potentially effective to ensure TCE vapors reduction.