The use of low-density polyethylene (PE) sheets as equilibrium passive soil gas samplers to quantify volatile organic compounds (VOCs) such as benzene, toluene, ethylbenzene, and xylenes, and chlorinated solvents (e.g., trichloroethene and tetrachloroethene) in unsaturated subsurface environments was evaluated via modeling and benchtop testing. Two methods were devised to quantify such VOCs in PE. Key chemical properties, including PE-water (KPEw) and PE-air (KPEa) partition coefficients and diffusivities in the PE (Dpe), were determined. These KPEw, KPEa, and Dpevalues were consistent with extrapolations of data based on larger compounds. Using these parameter values, field equilibration times of less than 1 day were estimated for such VOCs when using 70-100 μm thick PE sheets. Further, benchtop batch tests carried out in jars filled with VOC-contaminated soils, after 1 or 2 days, showed concentrations in soil air deduced from PE that were consistent with concentrations deduced by analyzing either water or headspace gases recovered from the same tests. Thus, PE-based measurements may overcome inaccuracies from using total soil concentrations and equilibrium partitioning models that may overestimate vapor phase concentrations up to 2 orders of magnitude.
Gschwend, P., Macfarlane, J., Jensen, D., Soo, J., Saparbaiuly, G., Borrelli, R., et al. (2022). In Situ Equilibrium Polyethylene Passive Sampling of Soil Gas VOC Concentrations: Modeling, Parameter Determinations, and Laboratory Testing. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 56(12), 7810-7819 [10.1021/acs.est.1c07045].
In Situ Equilibrium Polyethylene Passive Sampling of Soil Gas VOC Concentrations: Modeling, Parameter Determinations, and Laboratory Testing
Verginelli I.;Baciocchi R.
2022-01-01
Abstract
The use of low-density polyethylene (PE) sheets as equilibrium passive soil gas samplers to quantify volatile organic compounds (VOCs) such as benzene, toluene, ethylbenzene, and xylenes, and chlorinated solvents (e.g., trichloroethene and tetrachloroethene) in unsaturated subsurface environments was evaluated via modeling and benchtop testing. Two methods were devised to quantify such VOCs in PE. Key chemical properties, including PE-water (KPEw) and PE-air (KPEa) partition coefficients and diffusivities in the PE (Dpe), were determined. These KPEw, KPEa, and Dpevalues were consistent with extrapolations of data based on larger compounds. Using these parameter values, field equilibration times of less than 1 day were estimated for such VOCs when using 70-100 μm thick PE sheets. Further, benchtop batch tests carried out in jars filled with VOC-contaminated soils, after 1 or 2 days, showed concentrations in soil air deduced from PE that were consistent with concentrations deduced by analyzing either water or headspace gases recovered from the same tests. Thus, PE-based measurements may overcome inaccuracies from using total soil concentrations and equilibrium partitioning models that may overestimate vapor phase concentrations up to 2 orders of magnitude.File | Dimensione | Formato | |
---|---|---|---|
41_Gwschend et al 2022_Passive Sampling PE.pdf
solo utenti autorizzati
Tipologia:
Versione Editoriale (PDF)
Licenza:
Copyright dell'editore
Dimensione
1.26 MB
Formato
Adobe PDF
|
1.26 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.