Power exhaust is a key mission for the realization of fusion electricity. Engineering challenges may arise from the extreme heat fluxes developed during plasma transients, above the limit offered by existing materials. These can reduce the lifetime of plasma-facing components (PFCs), imposing extraordinary maintenance, reactor safety issues and ultimately delayed return to normal operation. Concerning the EU DEMO reactor, discrete sacrificial limiters are being investigated as the last safety resource of the reactor's wall in case of unmitigated events. Within this context, micro-engineered tungsten (W) lattices are proposed to cope with unmitigated plasma disruptions. Unlike bulk W, lattices can be tailored to meet the operational requirements of the limiter, compromise between steady-state and off-design performances while avoiding overloading of the heat sink and delay the need for extraordinary maintenance. By calibrating an equivalent solid model originally developed and validated for open-cell aluminum (Al) foams, tailored lattices have been modelled and samples fabricated through additive manufacturing for characterization and testing, currently ongoing.In the present work, the thermal response of lattice samples during thermal shock high heat flux (HHF) tests performed at the linear facility QSPA Kh-50 facility is simulated using ANSYS and compared with available results. Enthalpy changes of W were imposed to simulate phase change. Good agreement with experiments and SDC-IC reference up to melting point was observed. Ultimately, a thermal quench of an unmitigated DEMO disruption was simulated involving an original MAPDL routine that removes mesh elements at the melting or vaporization point.
De Luca, R., Fanelli, P., Hunteler, C.b., Vivio, F., Zhang, K., von Muller, A., et al. (2021). Comparison between finite element and experimental evidences of innovative W lattice materials for sacrificial limiter applications. FUSION ENGINEERING AND DESIGN, 169 [10.1016/j.fusengdes.2021.112493].
Comparison between finite element and experimental evidences of innovative W lattice materials for sacrificial limiter applications
Vivio F.;
2021-03-01
Abstract
Power exhaust is a key mission for the realization of fusion electricity. Engineering challenges may arise from the extreme heat fluxes developed during plasma transients, above the limit offered by existing materials. These can reduce the lifetime of plasma-facing components (PFCs), imposing extraordinary maintenance, reactor safety issues and ultimately delayed return to normal operation. Concerning the EU DEMO reactor, discrete sacrificial limiters are being investigated as the last safety resource of the reactor's wall in case of unmitigated events. Within this context, micro-engineered tungsten (W) lattices are proposed to cope with unmitigated plasma disruptions. Unlike bulk W, lattices can be tailored to meet the operational requirements of the limiter, compromise between steady-state and off-design performances while avoiding overloading of the heat sink and delay the need for extraordinary maintenance. By calibrating an equivalent solid model originally developed and validated for open-cell aluminum (Al) foams, tailored lattices have been modelled and samples fabricated through additive manufacturing for characterization and testing, currently ongoing.In the present work, the thermal response of lattice samples during thermal shock high heat flux (HHF) tests performed at the linear facility QSPA Kh-50 facility is simulated using ANSYS and compared with available results. Enthalpy changes of W were imposed to simulate phase change. Good agreement with experiments and SDC-IC reference up to melting point was observed. Ultimately, a thermal quench of an unmitigated DEMO disruption was simulated involving an original MAPDL routine that removes mesh elements at the melting or vaporization point.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
