Organo-metal halide perovskite demonstrates a large potential for achieving highly efficient photovoltaic devices. The scaling-up process represents one of the major challenges to exploit this technology at the industrial level. Here, the scaling-up of perovskite solar modules from 5 x 5 to 10 x 10 cm(2) substrate area is reported by blade coating both the CH3NH3PbI3 perovskite and spiro-OMeTAD layers. The sequential deposition approach is used in which both lead iodide (PbI2) deposition and the conversion step are optimized by using additives. The PbI2 solution is modified by adding methylammonium iodide (MAI) which improves perovskite crystallinity and pore filling of the mesoporous TiO2 scaffold. Optimization of the conversion step is achieved by adding a small concentration of water into the MAI-based solution, producing large cubic CH3NH3PbI3 grains. The combination of the two modifications leads to a power conversion efficiency of 14.7% on a perovskite solar module with an active area of 47 cm(2).

Matteocci, F., Vesce, L., Kosasih, F.u., Castriotta, L.a., Cacovich, S., Palma, A.l., et al. (2019). Fabrication and Morphological Characterization of High-Efficiency Blade-Coated Perovskite Solar Modules. ACS APPLIED MATERIALS & INTERFACES, 11(28), 25195-25204 [10.1021/acsami.9b05730].

Fabrication and Morphological Characterization of High-Efficiency Blade-Coated Perovskite Solar Modules

Matteocci F.;Vesce L.;Palma A. L.;Di Carlo A.
2019-01-01

Abstract

Organo-metal halide perovskite demonstrates a large potential for achieving highly efficient photovoltaic devices. The scaling-up process represents one of the major challenges to exploit this technology at the industrial level. Here, the scaling-up of perovskite solar modules from 5 x 5 to 10 x 10 cm(2) substrate area is reported by blade coating both the CH3NH3PbI3 perovskite and spiro-OMeTAD layers. The sequential deposition approach is used in which both lead iodide (PbI2) deposition and the conversion step are optimized by using additives. The PbI2 solution is modified by adding methylammonium iodide (MAI) which improves perovskite crystallinity and pore filling of the mesoporous TiO2 scaffold. Optimization of the conversion step is achieved by adding a small concentration of water into the MAI-based solution, producing large cubic CH3NH3PbI3 grains. The combination of the two modifications leads to a power conversion efficiency of 14.7% on a perovskite solar module with an active area of 47 cm(2).
Pubblicato
Rilevanza internazionale
Articolo
Esperti anonimi
Settore ING-INF/01 - Elettronica
English
blade-coating; perovskite solar modules; pore filling; uniformity; upscaling
Matteocci, F., Vesce, L., Kosasih, F.u., Castriotta, L.a., Cacovich, S., Palma, A.l., et al. (2019). Fabrication and Morphological Characterization of High-Efficiency Blade-Coated Perovskite Solar Modules. ACS APPLIED MATERIALS & INTERFACES, 11(28), 25195-25204 [10.1021/acsami.9b05730].
Matteocci, F; Vesce, L; Kosasih, Fu; Castriotta, La; Cacovich, S; Palma, Al; Divitini, G; Ducati, C; Di Carlo, A
Articolo su rivista
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2108/224890
Citazioni
  • ???jsp.display-item.citation.pmc??? 7
  • Scopus 43
  • ???jsp.display-item.citation.isi??? 42
social impact