In this article, the design of a dual-band PA developed in SiGe HBT technology and its system level investigation are presented. Starting from an extensive nonlinear characterization at the device level, by which the optimum load conditions was inferred, an optimized amplifier capable to operate simultaneously at 2.45 and 3.5 GHz was designed. The designed amplifier exhibits in single-band mode operation 9.3 dBm and 13.4 dBm output power (1 dB compression point) at 2.45 GHz and 3.5 GHz, respectively. When working under simultaneous channel amplifications, an higher reduction of the I dB compression point at 3.5 GHz, compared with the one at 2.45 GHz, is observed; this reflects in a more significant degradations of system level performance such as the error vector magnitude. The investigation provided in this article and the conclusions suggest new concepts and possible new system architectures for the development of the next generation of multi-band transceiver front-end. (C) 2008 Wiley Periodicals. Inc. Int J RF and Microwave CAE 18: 552-563 2008.

Colantonio, P., Giannini, F., Giofre', R., Piazzon, L., Camarchia, V., Pirola, M., et al. (2008). From device characterization to system level analysis of dual band PA design in SiGe technology. INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, 18(6), 552-563 [10.1002/mmce.20331].

From device characterization to system level analysis of dual band PA design in SiGe technology

COLANTONIO, PAOLO;GIANNINI, FRANCO;GIOFRE', ROCCO;PIAZZON, LUCA;
2008-01-01

Abstract

In this article, the design of a dual-band PA developed in SiGe HBT technology and its system level investigation are presented. Starting from an extensive nonlinear characterization at the device level, by which the optimum load conditions was inferred, an optimized amplifier capable to operate simultaneously at 2.45 and 3.5 GHz was designed. The designed amplifier exhibits in single-band mode operation 9.3 dBm and 13.4 dBm output power (1 dB compression point) at 2.45 GHz and 3.5 GHz, respectively. When working under simultaneous channel amplifications, an higher reduction of the I dB compression point at 3.5 GHz, compared with the one at 2.45 GHz, is observed; this reflects in a more significant degradations of system level performance such as the error vector magnitude. The investigation provided in this article and the conclusions suggest new concepts and possible new system architectures for the development of the next generation of multi-band transceiver front-end. (C) 2008 Wiley Periodicals. Inc. Int J RF and Microwave CAE 18: 552-563 2008.
2008
Pubblicato
Rilevanza internazionale
Articolo
Sì, ma tipo non specificato
Settore ING-INF/01 - ELETTRONICA
English
Con Impact Factor ISI
Dual band; Power amplifiers; SiGe; System analysis
Colantonio, P., Giannini, F., Giofre', R., Piazzon, L., Camarchia, V., Pirola, M., et al. (2008). From device characterization to system level analysis of dual band PA design in SiGe technology. INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, 18(6), 552-563 [10.1002/mmce.20331].
Colantonio, P; Giannini, F; Giofre', R; Piazzon, L; Camarchia, V; Pirola, M; Ghione, G; Cidronali, A; Magrini, I; Manes, G; Scholz, R; Knoll, D
Articolo su rivista
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2108/27869
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 2
  • ???jsp.display-item.citation.isi??? 2
social impact